Remove/Replace Bee Drive Wheel

To replace the drive wheel on a Bee, King Bee, or Queen Bee:

• Loosen the brass screw behind the wheel

• Open the treadle

• Push the shaft forward until the wheel is free

• Several washers will fall out - keep these to put on with the new wheel as well as the wire ring.

• Put the shaft into the new wheel

• Add the wire ring to the shaft (next to the new wheel)

• Then add the washers

• Slide the wheel down into place

• Push the shaft into the base

• Tighten the bass screw to secure

• Reinstall the Drive Band