Print your own 4 oz SpinOlution Bobbins!
FOR PERSONAL USE ONLY. NOT TO BE PRINTED AND RESOLD.
“Hexbobbin” is the back of the bobbin. It is driven from the hex collar on the flyer. It snaps onto the flyer shaft. There is a very tiny key that aligns with the hex bobbin.
A US ¼ inch washer is in the top of the Hexbobbin.
The washer is a little under ¾ inch OD and .312 inch ID.
“Bobbin front” screws onto “bobbin shaft”.
The first time the bobbin is put onto the flyer shaft will empty the hole of print waste.
Benefits of 3D Bobbins
Lighter Weight on the flyer
More volume for a higher yarn capacity
Plastic bobbins are less durable than wood bobbins
